Ozone and UV technology

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Tap water: UV treatment extends the area of application and increases safety. Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Tap water: UV treatment extends the area of application and increases safety. Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance

Water sterilisation by UV irradiation The development of water sterilisation using UV radiation has made considerable progress in recent years due to its simplicity and efficiency. The UV-C rays generated, which are significantly more intense than sunlight, are therefore used to disinfect water in order to counteract water contamination. They make it possible to remove legionella, microbes, bacteria, viruses and protozoa while respecting the environment. The irradiation process is therefore an ideal solution for killing microorganisms in water and helps to make it drinkable from a bacteriological point of view. However, it is important to note that water is only considered drinking water once the chemical parameters have been checked and deemed satisfactory.  Applications - Origin of the water Rainwater: UV treatment extends the range of applications and offers increased safety during use Well water: Avoidance of possible contamination by pathogens Tap water: UV treatment extends the area of application and increases safety. Spring water, surface water: Guarantees constant water quality that is flawless from a bacteriological point of view. Storage water in containers (caravan, boat...): Use of stored water for sanitary purposes.  Areas of application General nutrition, bath and shower Cooking Large-volume refrigerators Cold water fountains Aquarium Cleaning food  Advantages  Quick and easy installation Completely physical sterilisation through UV radiation Natural water treatment without additives and without the risk of chemical overdose No unpleasant taste or odour Effective methods for combating microorganisms that cause disease in humans No toxic by-products Low maintenance

Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting. The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water. Outstanding features: Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection. Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms. Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance. Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply. UV lamp 25W: Insert for UV2100 and TRIO UV 25W UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W

Product description: UV lamp 25W / 40W for Cintropur UV2100 / UV4100 flow-through fitting. The 25W / 40W UV lamp is an essential accessory for the Cintorpur UV2100 / UV4100 flow-through fitting, ensuring maximum efficiency and safety when disinfecting water. With its powerful 25 / 40 watt output, this lamp ensures reliable and thorough disinfection of the water. Outstanding features: Annual replacement required: To ensure constant and effective disinfection of the water, it is mandatory to replace the UV lamp once a year. This ensures that the lamp always provides optimum performance and ensures reliable disinfection. Continuous operation around the clock: The UV lamp is designed to operate 24 hours a day, 7 days a week. This continuous use enables constant sterilisation of the water, which is particularly important in environments with high hygiene requirements, such as companies, clinics or farms. Protection from moisture and fingerprints: To ensure the longevity and efficiency of the lamp, it is essential to protect it from moisture and fingerprints. This can be achieved by proper installation in the UV2100 / UV4100 flow-through fitting as well as regular cleaning and maintenance. Effective disinfection through UV technology: UV light is known for its effectiveness in killing bacteria, viruses and other micro-organisms in water. The UV lamp utilises this technology to ensure thorough, reliable disinfection of the water and provide os with a safe water supply. UV lamp 25W: Insert for UV2100 and TRIO UV 25W UV lamp 40W: Insert for UV4100, DUO-UV and TRIO-UV 40W

Effective UV Disinfection for Safe Water – Chemical-Free Physical UV-C disinfection for reliable reduction of microorganisms directly in the water system The Cintropur UV2100 uses ultraviolet (UV-C) radiation to physically remove bacteria, viruses, and microorganisms from water. UV-C light disinfects the water, preventing microbial contamination. This method works without chemical additives, leaving the taste, odor, and composition of the water unchanged. UV disinfection occurs directly within the water system and leaves no residues or by-products. The compact unit can be flexibly integrated into pipelines with the appropriate connection sizes and is designed for low-maintenance operation. Physical UV disinfection provides a reliable reduction of microorganisms in water without residues or chemical by-products. It is important to note that water is only considered drinking water once chemical parameters have been checked and deemed safe. Versatile Applications of the UV Disinfection System The CINTROPUR UV2100 is suitable for a wide range of applications requiring reliable microbial reduction in water, including: Pharmaceutical industry Food and beverage industry Hospitals and medical facilities Swimming pools and water installations Water management Animal husbandry and breeding (e.g., chickens, rabbits, ducks) Benefits of Physical UV Disinfection with the CINTROPUR UV2100 The UV disinfection system offers several advantages over chemical methods: Simple and quick installation Purely physical disinfection using UV-C radiation Chemical-free natural water treatment No risk of overdosing No unpleasant taste or odor Effective reduction of pathogenic microorganisms No toxic by-products or residues Low maintenance requirements

Physical UV Sterilization for Hygienically Clean Water Effective UV-C disinfection without chemicals for reliable water hygiene The Cintropur UV4100 uses UV-C radiation for the physical disinfection of water and reliably reduces microorganisms such as bacteria, viruses, and protozoa. Water treatment is carried out entirely without chemical additives, ensuring that no by-products are formed and that taste and odor remain unaffected. The water flows through a reactor housing in which UV-C radiation inactivates microorganisms without leaving chemical residues. This makes the Cintropur UV4100 a natural and gentle method of water treatment. It is ideally suited for applications where hygienically safe water is required and the use of chemical disinfectants is deliberately avoided. Regular inspection and timely replacement of the UV lamp ensure that disinfection efficiency remains consistently high throughout the entire operating period. Where can the Cintropur UV4100 be used? This UV disinfection system is suitable for numerous applications with high requirements for water hygiene, including: Pharmaceutical industry Food and beverage industry Hospitals and medical facilities Swimming pools and water systems Water management Animal husbandry and breeding (e.g. chickens, rabbits, ducks) What are the benefits of UV sterilization with the Cintropur UV4100? Compared to chemical disinfection methods, physical UV disinfection offers numerous advantages: Easy and fast installation Purely physical disinfection using UV-C radiation Natural water treatment without chemical additives No risk of chemical overdosing No unpleasant taste or odor Effective reduction of pathogenic microorganisms No toxic by-products or residues Low maintenance requirements

The system consists of:Ozone generator with high voltage / high frequency power supply and ozone generator module with a ceramic dielectric; function and fault indicators: Ozone fault lamp; operating gas fault indicator, variable ozone output control (internal and external); flow meter for oxygen. Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the generation of approx. 95 % oxygen.

The system consists of:Ozone generator with high voltage / high frequency power supply and ozone generator module with a ceramic dielectric; function and fault indicators: Ozone fault lamp; operating gas fault indicator, variable ozone output control (internal and external); flow meter for oxygen. Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the generation of approx. 95 % oxygen.

The system consists of:Ozone generator with high voltage / high frequency power supply and ozone generator module with a ceramic dielectric; function and fault indicators: Ozone fault lamp; operating gas fault indicator, variable ozone output control (internal and external); flow meter for oxygen. Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the generation of approx. 95 % oxygen.

The system consists of:Ozone generator with high voltage / high frequency power supply and ozone generator module with a ceramic dielectric; function and fault indicators: Ozone fault lamp; operating gas fault indicator, variable ozone output control (internal and external); flow meter for oxygen. Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the generation of approx. 95 % oxygen.

OZONE GENERATORS FOR WATER TREATMENTThe ozone systems are completely piped, connected and ready for operation on the mounting frame. The systems each consist of:Ozone generator with high voltage/high frequency power supply and ozone generator module with a ceramic dielectric; Control and indication instruments: ON/OFF switch; Ozone ON/OFF switch; Ozone local/remote switch; Ozone ON/OFF lamp; Ozone fault lamp; Operating gas fault indicator; Adjustment knob for variable ozone production; External control input for ozone (4-20 mA); Flow meter and regulator for oxygen with pressure control valve.Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the production of approx. 95 % oxygenOzone injection system with booster pump and liquid jet injector for suction and mixing of the ozone-containing oxygen with motive water including check valve in the ozone gas line and piping of the components in ozone-resistant Teflon and PVC materialsControl box with indicator lamps for operating mode and malfunction Main switch, EMERGENCY STOP; pump malfunction indicator; local/remote changeover switch and connection terminals

OZONE GENERATORS FOR WATER TREATMENTThe ozone systems are completely piped, connected and ready for operation on the mounting frame. The systems each consist of:Ozone generator with high voltage/high frequency power supply and ozone generator module with a ceramic dielectric; Control and indication instruments: ON/OFF switch; Ozone ON/OFF switch; Ozone local/remote switch; Ozone ON/OFF lamp; Ozone fault lamp; Operating gas fault indicator; Adjustment knob for variable ozone production; External control input for ozone (4-20 mA); Flow meter and regulator for oxygen with pressure control valve.Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the production of approx. 95 % oxygenOzone injection system with booster pump and liquid jet injector for suction and mixing of the ozone-containing oxygen with motive water including check valve in the ozone gas line and piping of the components in ozone-resistant Teflon and PVC materialsControl box with indicator lamps for operating mode and malfunction Main switch, EMERGENCY STOP; pump malfunction indicator; local/remote changeover switch and connection terminals

OZONE GENERATORS FOR WATER TREATMENTThe ozone systems are completely piped, connected and ready for operation on the mounting frame. The systems each consist of:Ozone generator with high voltage/high frequency power supply and ozone generator module with a ceramic dielectric; Control and indication instruments: ON/OFF switch; Ozone ON/OFF switch; Ozone local/remote switch; Ozone ON/OFF lamp; Ozone fault lamp; Operating gas fault indicator; Adjustment knob for variable ozone production; External control input for ozone (4-20 mA); Flow meter and regulator for oxygen with pressure control valve.Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the production of approx. 95 % oxygenOzone injection system with booster pump and liquid jet injector for suction and mixing of the ozone-containing oxygen with motive water including check valve in the ozone gas line and piping of the components in ozone-resistant Teflon and PVC materialsControl box with indicator lamps for operating mode and malfunction Main switch, EMERGENCY STOP; pump malfunction indicator; local/remote changeover switch and connection terminals

OZONE GENERATORS FOR WATER TREATMENTThe ozone systems are completely piped, connected and ready for operation on the mounting frame. The systems each consist of:Ozone generator with high voltage/high frequency power supply and ozone generator module with a ceramic dielectric; Control and indication instruments: ON/OFF switch; Ozone ON/OFF switch; Ozone local/remote switch; Ozone ON/OFF lamp; Ozone fault lamp; Operating gas fault indicator; Adjustment knob for variable ozone production; External control input for ozone (4-20 mA); Flow meter and regulator for oxygen with pressure control valve.Fully automatic oxygen concentrator with pressure change system and integrated air compressor with boiler for the production of approx. 95 % oxygenOzone injection system with booster pump and liquid jet injector for suction and mixing of the ozone-containing oxygen with motive water including check valve in the ozone gas line and piping of the components in ozone-resistant Teflon and PVC materialsControl box with indicator lamps for operating mode and malfunction Main switch, EMERGENCY STOP; pump malfunction indicator; local/remote changeover switch and connection terminals

The LAB2B is a corona discharge type ozone generator with variable ozone output up to 10 g/h ozone in oxygen and 4 g/h ozone using dried air. The air-cooled ozone generator is enclosed in an compact desktop housing for bench use. ApplicationsResearch and development Education Laboratories Technology and how it worksThe Ozone generator LAB2B is built in a small desktop housing with air cooler, especially suited for laboratory application. The instrument consists of operation displays, flow meter for the feedgas and a controller for the variable power adjustment. The ozone output is adjustable via a rotary knob at the font side of the housing. The LAB2B can be operated with oxygen or dried air.Ozone is produced when oxygen containing gas is passed over the ceramic dielectric of an ozone generating module. The module is powered by a high voltage/high frequency power board.The ceramic dielectric is housed within a finned heat sink block which is air cooled by fan assisted atmospheric air. Technical features Variable ozone production up to 10 g/h Operating method: vacuum or pressure (10psi max.) Illuminating switches indicating ozone production and faults Ozone generating module cooling medium: ambient air (fan assisted) O&M manual including performance graphs Feedgas: oxygen or dried air Dimensions: (LxWxD): 230 mm x 300 mm x 160 mm Connections: PVDF compression fitting to suit 8 mm pipe / tube Flowmeter: 2-10 l/min Enclosure: 316 mild steel, epoxy-coated Ozone generating module: 316 stainless steel electrode assembly inside a ceramic dielectric tube Remote controls and signalsOzone ON-OFF: green illuminator switch Fault: red illuminator switch Power supply230 VAC, 50-60 Hz

TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.

TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.