LAB2B Ozone Generator
€5,275.40*
Please log in to receive your conditions.
Available in 21 days, delivery time 1-2 days
(Login for quotation) The entered number of pieces will be taken into account when creating the quotation.
Product information "LAB2B Ozone Generator"
The LAB2B is a corona discharge type ozone generator with variable ozone output up to 10 g/h ozone in oxygen and 4 g/h ozone using dried air.
The air-cooled ozone generator is enclosed in an compact desktop housing for bench use.
Applications
- Research and development
- Education
- Laboratories
Technology and how it works
The Ozone generator LAB2B is built in a small desktop housing with air cooler, especially suited for laboratory application. The instrument consists of operation displays, flow meter for the feedgas and a controller for the variable power adjustment. The ozone output is adjustable via a rotary knob at the font side of the housing. The LAB2B can be operated with oxygen or dried air.Ozone is produced when oxygen containing gas is passed over the ceramic dielectric of an ozone generating module. The module is powered by a high voltage/high frequency power board.The ceramic dielectric is housed within a finned heat sink block which is air cooled by fan assisted atmospheric air.
Technical features
- Variable ozone production up to 10 g/h
- Operating method: vacuum or pressure (10psi max.)
- Illuminating switches indicating ozone production and faults
- Ozone generating module cooling medium: ambient air (fan assisted)
- O&M manual including performance graphs
- Feedgas: oxygen or dried air
- Dimensions: (LxWxD): 230 mm x 300 mm x 160 mm
- Connections: PVDF compression fitting to suit 8 mm pipe / tube
- Flowmeter: 2-10 l/min
- Enclosure: 316 mild steel, epoxy-coated
- Ozone generating module: 316 stainless steel electrode assembly inside a ceramic dielectric tube
Remote controls and signals
- Ozone ON-OFF: green illuminator switch
- Fault: red illuminator switch
Power supply
230 VAC, 50-60 Hz
Frequently Asked Questions
Yes
Yes
The maximum permissible pressure is 0.7 bar.
Ozone output can be manually adjusted via a rotary control within the 10–100% range. The control does not have fixed increments within this range.
To ensure stable operation, an operating gas flow rate of 2–5 liters of oxygen per minute must be maintained.
No
All materials used must be ozone-resistant. PTFE, PVDF, or Viton are suitable choices.
We do not have a standard document for this. As a general rule, any residual ozone remaining in the reactor must not be vented directly into the room. Operation inside a laboratory fume hood is recommended; alternatives include a technical ventilation system with a sufficiently high air exchange rate or the integration of a residual ozone destruct unit. An ozone monitor is recommended for regular operation.
Dimensions
| Height | 26 cm |
|---|---|
| Length | 47 cm |
| Width | 47 cm |
Weight
| Weight | 8 kg |
|---|
Other attributes
| Country of origin | GB |
|---|---|
| Customs tariff number | 84051000 |