Ozone and UV technology
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
TOC REDUCTION IN ULTRAPURE WATER SYSTEMS Stainless steel reactor (1.4571 DIN EN 10217-7; optionally 1.4404) electropolished inside and outside with thread or flange connection to DIN 2576, SUPRASIL quartz immersion tube and UV low-pressure lamp (ozone-forming). Electronic ballast for single-lamp systems in plastic housing and for multi-lamp systems in sheet steel housing (dimensions on request) with function display, operating hours counter and manual/auto switch (230 VAC, optionally 400 VAC) incl. UV monitoring system. Variants: TOC 0.05 TOC 0.35 TOC 2.3 TOC 3.1 TOC 5.5 TOC 8 TOC 10 TOC 14 TOC 18 TOC 24 TOC 28 TOC 32 Flow rate value applies to water with a UV transmission of 98% / 1cm and 1600 J/m² UV irradiation. UV systems for higher flow rates, as well as radiation doses and without UV monitoring are available on request.
Catalytic residual ozone destroyer Ozone Destruct for the reduction of excess ozone in the tank exhaust air line of ultrapure water systems. The unit consists of: Reactor housing stainless steel DN 80 (outer surface Ra 0.80 µm, weld seams ground) with TriClamp connections according to DIN 32676 for air inlet and exhaust air (other connections on request), flow internals and droplet separator, Carulite 200 catalyst granulate and electrical trace heating. Documentation: - Classification of pressure equipment according to DGRL2014/68/EU- Acceptance test certificates for metallic materials according to DIN EN 10204 3.1 - Restamping certificates - Seals certificate of conformity according to FDA (21 CFR § 177.2600), EC 1935/2004, USP Class VI - Assembly and operating instructions, incl safety data sheet Carulite 200
Catalytic residual ozone destroyer Ozone Destruct for the reduction of excess ozone in the tank exhaust air line of ultrapure water systems. The unit consists of: Reactor housing stainless steel DN 80 (outer surface Ra 0.80 µm, weld seams ground) with TriClamp connections according to DIN 32676 for air inlet and exhaust air (other connections on request), flow internals and droplet separator, Carulite 200 catalyst granulate and electrical trace heating. Documentation: - Classification of pressure equipment according to DGRL2014/68/EU- Acceptance test certificates for metallic materials according to DIN EN 10204 3.1 - Restamping certificates - Seals certificate of conformity according to FDA (21 CFR § 177.2600), EC 1935/2004, USP Class VI - Assembly and operating instructions, incl safety data sheet Carulite 200
Catalytic residual ozone destroyer Ozone Destruct for the reduction of excess ozone in the tank exhaust air line of ultrapure water systems. The unit consists of: Reactor housing stainless steel DN 80 (outer surface Ra 0.80 µm, weld seams ground) with TriClamp connections according to DIN 32676 for air inlet and exhaust air (other connections on request), flow internals and droplet separator, Carulite 200 catalyst granulate and electrical trace heating. Documentation: - Classification of pressure equipment according to DGRL2014/68/EU- Acceptance test certificates for metallic materials according to DIN EN 10204 3.1 - Restamping certificates - Seals certificate of conformity according to FDA (21 CFR § 177.2600), EC 1935/2004, USP Class VI - Assembly and operating instructions, incl safety data sheet Carulite 200
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozone generators CFS for industrial applications and water treatment; water-cooled generator in compact sheet steel housing (IP 42) for oxygen or dried air as operating gas according to the "silent electrical discharge" method.Consisting of the following components:Ozone generation module made of stainless steel and ceramic dielectric; IGBT power supply with high-voltage transformer and medium-frequency converter electronics.Control and display instruments: Flow meter with adjustment valve for operating gas; pressure control valve with operating pressure indicator; membrane keypad for setting the ozone production quantity (power control 10-100 %) and operating control with display for electrical power, operating hours, operating mode and fault.Floating outputs: remote ON/OFF, open gas valves and alarmsExternal setpoint: 4-20 mA
Ozonia* Membrel MkV ozone generation plant based on the catalytic water electrolysis process; suitable for sterilization and sanitization of ultrapure water in ring piping systems in the pharmaceutical and semiconductor industriesThe plant consists of 1, 2 or 3 current-regulated electrolysis cells including electrode set (anode, cathode and solid electrolyte membrane) and an electric feeder. Ozone production per cell: 3-4 g/h Feed water flow per cell: nom. 100 l/h Feed water conductance: < 20 μS/cm Operating pressure: max. 6 bar Electrical power per cell: 460 W/ 230 VAC, 50-60 Hz Ozone power setting: 8-100%Control functions (floating): System ON/OFF; control and set point LOCAL/REMOTE supply ON/OFF /collective alarm Control function (4-20 mA): electrolysis current for ozone production Component plant MkV-K consisting of: an electrolytic cell made of PVDF / titanium / stainless steel (316L) with temperature monitoring Connections feed water and ozone-strong water: TriClamp TC25 ID 6 mm n. DIN 32676-A Connections hydrogen and waste water: SERTO for pipe 10 x 1 mm for installation in the pipeline bypass (flow meter and control valve to be supplied by the customer) Electrical power supply unit with power supply, controller unit and emergency battery in IP 54 stainless steel housing, 0.50 m connection cable for electrolysis cells*Trademark of Veolia; may be registered in one or more countries.
Ozonia* Membrel MkV ozone generation plant based on the catalytic water electrolysis process; suitable for sterilization and sanitization of ultrapure water in ring piping systems in the pharmaceutical and semiconductor industriesThe plant consists of 1, 2 or 3 current-regulated electrolysis cells including electrode set (anode, cathode and solid electrolyte membrane) and an electric feeder. Ozone production per cell: 3-4 g/h Feed water flow per cell: nom. 100 l/h Feed water conductance: < 20 μS/cm Operating pressure: max. 6 bar Electrical power per cell: 460 W/ 230 VAC, 50-60 Hz Ozone power setting: 8-100%Control functions (floating): System ON/OFF; control and set point LOCAL/REMOTE supply ON/OFF /collective alarm Control function (4-20 mA): electrolysis current for ozone production Component plant MkV-K consisting of: two electrolytic cells made of PVDF / titanium / stainless steel (316L) with temperature monitoring Connections feed water and ozone-strong water: TriClamp TC25 ID 6 mm n. DIN 32676-A Connections hydrogen and waste water: SERTO for pipe 10 x 1 mm for installation in the pipeline bypass (flow meter and control valve to be supplied by the customer) Electrical power supply unit with power supply, controller unit and emergency battery in IP 54 stainless steel housing, 0.50 m connection cable for electrolysis cells*Trademark of Veolia; may be registered in one or more countries.
Ozonia* Membrel MkV ozone generation plant based on the catalytic water electrolysis process; suitable for sterilization and sanitization of ultrapure water in ring piping systems in the pharmaceutical and semiconductor industriesThe plant consists of 1, 2 or 3 current-regulated electrolysis cells including electrode set (anode, cathode and solid electrolyte membrane) and an electric feeder. Ozone production per cell: 3-4 g/h Feed water flow per cell: nom. 100 l/h Feed water conductance: < 20 μS/cm Operating pressure: max. 6 bar Electrical power per cell: 460 W/ 230 VAC, 50-60 Hz Ozone power setting: 8-100%Control functions (floating): System ON/OFF; control and set point LOCAL/REMOTE supply ON/OFF /collective alarm Control function (4-20 mA): electrolysis current for ozone production Component plant MkV-K consisting of: three electrolytic cells made of PVDF / titanium / stainless steel (316L) with temperature monitoring Connections feed water and ozone-strong water: TriClamp TC25 ID 6 mm n. DIN 32676-A Connections hydrogen and waste water: SERTO for pipe 10 x 1 mm for installation in the pipeline bypass (flow meter and control valve to be supplied by the customer) Electrical power supply unit with power supply, controller unit and emergency battery in IP 54 stainless steel housing, 0.50 m connection cable for electrolysis cells*Trademark of Veolia; may be registered in one or more countries.
Ozonia* Membrel MkV ozone generation plant based on the catalytic water electrolysis process; suitable for sterilization and sanitization of ultrapure water in ring piping systems in the pharmaceutical and semiconductor industriesThe plant consists of 1, 2 or 3 current-regulated electrolysis cells including electrode set (anode, cathode and solid electrolyte membrane) and an electric feeder. Ozone production per cell: 3-4 g/h Feed water flow per cell: nom. 100 l/h Feed water conductance: < 20 μS/cm Operating pressure: max. 6 bar Electrical power per cell: 460 W/ 230 VAC, 50-60 Hz Ozone power setting: 8-100%Control functions (floating): System ON/OFF; control and set point LOCAL/REMOTE supply ON/OFF /collective alarm Control function (4-20 mA): electrolysis current for ozone production System plants MkV-S ready for operation and connection; consisting of: Electrolysis cells made of PVDF / titanium / stainless steel (316L) internally piped incl. flow meter and control valve; with temperature and flow monitoring; installed in stainless steel housing IP54 Connections Feed water and ozone-strong water: TriClamp TC25 ID 10 mm n. DIN 32676-A Connections hydrogen and waste water: SERTO for pipe 10 x 1 mm Electrical supply unit with power supply, controller unit and emergency battery in IP 54 stainless steel housing, wired directly to electrolysis cell via connection cable*Trademark of Veolia; may be registered in one or more countries.
Ozonia* Membrel MkV ozone generation plant based on the catalytic water electrolysis process; suitable for sterilization and sanitization of ultrapure water in ring piping systems in the pharmaceutical and semiconductor industriesThe plant consists of 1, 2 or 3 current-regulated electrolysis cells including electrode set (anode, cathode and solid electrolyte membrane) and an electric feeder. Ozone production per cell: 3-4 g/h Feed water flow per cell: nom. 100 l/h Feed water conductance: < 20 μS/cm Operating pressure: max. 6 bar Electrical power per cell: 460 W/ 230 VAC, 50-60 Hz Ozone power setting: 8-100%Control functions (floating): System ON/OFF; control and set point LOCAL/REMOTE supply ON/OFF /collective alarm Control function (4-20 mA): electrolysis current for ozone production System plants MkV-S ready for operation and connection; consisting of: Electrolysis cells made of PVDF / titanium / stainless steel (316L) internally piped incl. flow meter and control valve; with temperature and flow monitoring; installed in stainless steel housing IP54 Connections Feed water and ozone-strong water: TriClamp TC25 ID 10 mm n. DIN 32676-A Connections hydrogen and waste water: SERTO for pipe 10 x 1 mm Electrical supply unit with power supply, controller unit and emergency battery in IP 54 stainless steel housing, wired directly to electrolysis cell via connection cable*Trademark of Veolia; may be registered in one or more countries.
Ozonia* Membrel MkV ozone generation plant based on the catalytic water electrolysis process; suitable for sterilization and sanitization of ultrapure water in ring piping systems in the pharmaceutical and semiconductor industriesThe plant consists of 1, 2 or 3 current-regulated electrolysis cells including electrode set (anode, cathode and solid electrolyte membrane) and an electric feeder. Ozone production per cell: 3-4 g/h Feed water flow per cell: nom. 100 l/h Feed water conductance: < 20 μS/cm Operating pressure: max. 6 bar Electrical power per cell: 460 W/ 230 VAC, 50-60 Hz Ozone power setting: 8-100%Control functions (floating): System ON/OFF; control and set point LOCAL/REMOTE supply ON/OFF /collective alarm Control function (4-20 mA): electrolysis current for ozone production System plants MkV-S ready for operation and connection; consisting of: Electrolysis cells made of PVDF / titanium / stainless steel (316L) internally piped incl. flow meter and control valve; with temperature and flow monitoring; installed in stainless steel housing IP54 Connections Feed water and ozone-strong water: TriClamp TC25 ID 10 mm n. DIN 32676-A Connections hydrogen and waste water: SERTO for pipe 10 x 1 mm Electrical supply unit with power supply, controller unit and emergency battery in IP 54 stainless steel housing, wired directly to electrolysis cell via connection cable*Trademark of Veolia; may be registered in one or more countries.