This version is particularly suitable wherever a robust design, a protected sensor configuration, and a longer immersion length are required. JUMO tecLine pH electrode with PSU plastic shaft, protection cage, glass fiber diaphragm, Pg13.5 screw head and 225 mm immersion length This pH electrode is designed for reliable pH measurements in process and industrial applications and is especially suitable for measuring points where a rugged construction is required. With its PSU plastic shaft and integrated protection cage, this version is particularly useful when the sensor needs additional protection against mechanical stress during operation. This makes it a good choice for users looking for a durable electrode for regular use in aqueous media. Advantages and special features A key advantage of this version is its practical design. The UW glass is suitable for measurements in the range of pH 0 to 12, and short-term up to pH 14, and can be used in a temperature range from -5 to +80 °C. This makes the electrode suitable for a wide range of typical applications in water and process analytics. The glass fiber diaphragm supports reliable reference conduction, while the cartridge-based reference system is designed for stable measurement performance during continuous operation. Why choose this electrode? This version is particularly interesting when a robust plastic-shaft electrode with a protection cage is required. The protection cage helps safeguard the sensitive sensor area in daily use, which is a clear advantage in demanding environments or frequent handling situations. In addition, the 225 mm immersion length makes this version especially suitable for measuring points where a longer electrode is required compared to standard designs. Typical applications Process and industrial applications Water treatment General water analysis Measuring points where pH in water or other aqueous media must be reliably monitored Users looking for a pH electrode designed for industrial environments and enhanced with a plastic shaft, protection cage, and 225 mm immersion length will find this JUMO tecLine version a well-suited solution. Technical data Base type: PSU plastic shaft with protection cage Active element: UW glass Measuring range: pH 0 to 12, short-term pH 14 Temperature range: -5 to +80 °C Diaphragm: 1 x glass fiber Reference system: cartridge reference system Electrical connection: Pg13.5 screw head (S8) Immersion length: 225 mm

This version of the pH electrode is particularly suitable wherever an extended immersion length, a robust plastic shaft, and a clear standard design without a protection cage are required. JUMO tecLine pH electrode with PSU plastic shaft without protection cage, glass fiber diaphragm, Pg13.5 screw head and 225 mm immersion length The JUMO tecLine pH electrode is designed for reliable pH measurements in process and industrial applications and is especially suitable for measuring points where a robust plastic shaft design without an additional protection cage is required. It is a solid choice for users looking for a durable industrial electrode for water and general aqueous media while deliberately opting for a streamlined and direct design. The PSU plastic shaft makes the electrode suitable for everyday use in industrial environments. In combination with the UW glass, the electrode is designed for a measuring range from pH 0 to 12, short-term up to pH 14, and for temperatures from -5 to +80 °C. This makes the version suitable for many typical measurement tasks in water and process analytics. Technical data Base type: PSU plastic shaft without protection cage Active element: UW glass Measuring range: pH 0 to 12, short-term pH 14 Temperature range: -5 to +80 °C Diaphragm: 1 x glass fiber Reference system: cartridge reference system Electrical connection: Pg13.5 screw head (S8) Immersion length: 225 mm Typical applications Process and industrial applications Water treatment General water analysis Measuring points where pH in water or other aqueous media must be reliably monitored Advantages and special features A key advantage of this version lies in its clear and uncomplicated design. Since it is built without a protection cage, it is particularly suitable for applications where no additional mechanical protection is required and the electrode can be directly integrated into the measuring point. Users looking for a longer pH electrode for standard industrial applications with a clean and simple design will find this version well suited. The glass fiber diaphragm supports reliable reference conduction in general aqueous media. It is complemented by a cartridge-based reference system designed for stable measurement conditions during continuous operation. Especially in process applications where reliable pH measurement is required without unnecessary additional features, this combination proves highly practical. Why choose this electrode? This version is particularly useful when a 225 mm pH electrode is required for industrial measuring points and a standard length is not sufficient. It is also suitable for applications where a robust plastic-shaft electrode without a protection cage is preferred. This makes it especially practical for installation situations where a longer electrode is needed and a direct, reduced design is advantageous. Users looking for a durable and industry-suitable pH electrode with a 225 mm immersion length that focuses on essential functionality and integrates easily into standard measurement tasks will find this tecLine version a strong choice.

Thanks to its robust design, this version is particularly suitable for thermally demanding process conditions. JUMO tecLine PRO pH electrode as process electrode with HT glass, annular gap diaphragm, Pg13.5 screw head and salt reservoir This pH electrode is designed for demanding pH measurements in process applications. It is particularly suitable for areas where high mechanical and chemical resistance is required. With its design as a process electrode featuring HT glass, open annular gap diaphragm, Pg13.5 screw head, and salt reservoir, this version is optimized for robust operating conditions. Technical data Basic type: JUMO tecLine PRO pH combination electrode Basic type extension: process electrode Sensing element: HT glass Measuring range: pH 0 to 14 Temperature range: 0 to +110 °C Diaphragm: annular gap diaphragm, gel made of polymerized solid electrolyte (“diaphragm-free”) Electrical connection to electrode: Pg13.5 screw head Additional features: salt reservoir Advantages and special features A key advantage of this version lies in its robust construction. According to your description, the electrode has a stable PVDF body, which practically eliminates the risk of sensor breakage. This is particularly important in industrial applications where the measuring point must not only provide reliable pH values but also withstand everyday mechanical stress. At the same time, the electrolyte of this combination electrode ensures stable readings even in critical, sulfite-containing media. This makes the electrode especially interesting for applications requiring a durable and process-suitable solution. Why should you choose this electrode? This version is particularly suitable when a robust process electrode is required for demanding media and elevated temperatures. The HT glass is designed for a measuring range of pH 0 to 14 and temperatures from 0 to +110 °C. This makes it ideal for processes that require both high temperature resistance and reliable pH measurement. The open annular gap diaphragm with gel made of polymerized solid electrolyte is also advantageous for applications requiring a durable and low-maintenance design. The salt reservoir further enhances the overall configuration. The connection side is also designed for professional use. The Pg13.5 screw head allows proper integration into suitable measuring systems. Additionally, a Pt1000 temperature sensor is integrated according to your general description. This is especially useful when temperature needs to be measured directly at the process point, for example for temperature compensation or additional process monitoring. Combined with its robust construction, this results in a well-designed electrode for applications requiring reliable pH measurement, temperature resistance, and high durability. Typical applications chemical industry wastewater treatment sewage treatment plants as well as the paper industry Wherever a durable process electrode with stable measurement performance and robust construction is required, this version is particularly suitable. It can fully demonstrate its strengths, especially under thermally demanding process conditions.

General descriptionThe electrodes are characterised by high mechanical and chemical resistance. Due to the stable PVDF body, there is practically no risk of the sensor breaking. The electrolyte of these combination electrodes guarantees a stable measured value, even in critical media containing sulphite.A Pt1000 temperature sensor is integrated. Depending on the application, the electrodes can be manufactured as pH or redox electrodes. An open annular gap diaphragm is used as the diaphragm.Areas of applicationChemical industryWaste water treatmentSewage treatmentPaper industrySelected version:Basic type: JUMO tecLine PRO pH combination electrodeBasic type extension: Process electrodeActive part: HT glassDiaphragm: annular gap diaphragmElectrical connection to electrode: VP plug-in head Pg13.5Extra codes: Salt reserve, with integrated Pt1000Order code: 201020/79-12-10-18/837, 841

Anyone looking for a pH electrode for process applications and placing value on UW glass, annular gap diaphragm, screw head Pg13.5, salt reservoir, and an especially robust design will make a solid choice with this JUMO tecLine PRO variant. JUMO tecLine PRO pH electrode as process electrode with UW glass, annular gap diaphragm, screw head Pg13.5 and salt reservoir This JUMO pH electrode is designed for demanding pH measurements in process applications. It is particularly suitable for areas where high mechanical and chemical resistance is required. As a process electrode with UW glass, open annular gap diaphragm, screw head Pg13.5, and salt reservoir, this version is designed for robust operating conditions and is significantly more durable than sensitive standard sensors. Advantages and Features A key advantage of this version is its robust construction. According to your description, the electrode features a stable PVDF body, which effectively eliminates the risk of breakage of the sensor. In industrial applications, this is an important factor when the measuring point must not only provide reliable pH values but also withstand mechanical stress in everyday operation. At the same time, the electrolyte of this combination electrode ensures stable measurement signals even in critical sulfite-containing media. This makes the electrode particularly suitable for applications where other designs may reach their limits more quickly. Why choose this electrode? This version is especially suitable when a robust process electrode is required for demanding media and industrial environments. The UW glass is designed for process applications, while the open annular gap diaphragm provides advantages in applications requiring a durable and process-compatible design. The additional salt reservoir can extend service life and is beneficial when long-term stability at the measuring point is required. This makes the electrode particularly attractive for users seeking a reliable and durable solution for pH measurement. The connection side is also designed for professional use. The screw head Pg13.5 enables compatible integration into suitable measurement systems. According to your description, a Pt1000 temperature sensor is also integrated. This is especially useful when temperature must be measured directly at the process point, for example for temperature compensation or additional process monitoring. Typical Applications Chemical industry Wastewater treatment Wastewater treatment plants Pulp and paper industry Wherever a durable process electrode with stable measurement performance and a robust design is required, this version is particularly suitable. It can demonstrate its strengths especially in demanding industrial environments. Technical Data Basic type: JUMO tecLine PRO combination pH electrode Type: Process electrode Sensing element: UW glass Diaphragm: annular gap diaphragm Electrical connection: screw head Pg13.5 Type additions: salt reservoir

General descriptionThe electrodes are characterised by high mechanical and chemical resistance. Due to the stable PVDF body, there is practically no risk of the sensor breaking. The electrolyte of these combination electrodes guarantees a stable measured value, even in critical media containing sulphite.A Pt1000 temperature sensor is integrated. Depending on the application, the electrodes can be manufactured as pH or redox electrodes. An open annular gap diaphragm is used as the diaphragm.Areas of applicationChemical industryWaste water treatmentSewage treatmentPaper industrySelected version:Basic type: JUMO tecLine PRO pH combination electrodeBasic type extension: Process electrodeActive part: UW glassDiaphragm: annular gap diaphragmElectrical connection to electrode: VP plug-in head Pg13.5Type supplements: Salt reserve, with integrated Pt1000Order code: 201020/79-18-10/837, 841

Connection cable for pH/redox Length: 3 metres Cable type: pH and redox connection cable Ø 5 mm, 75 °C Connection end 1 (sensor side): rotatable cable socket Connection end 2 (device side): without Electronic sensors for analysing liquids require special connection cables and plug connectors. The following applies in principle: The connection between an electrochemical sensor and the transmitter/indicator/controller should be as short as possible. Normally, the cable length is 5 to 10 metres to ensure a high level of functional reliability. If longer cable lengths are required in exceptional cases, the technical documentation for the sensors and measuring devices should be consulted. The cable between the sensor and the analyser must be laid directly, without interruptions such as terminal strips or cable extensions. pH and redox measurement Special coaxial cables with a special design are used for pH and redox measurement. During these measurements, the sensor generates low-intensity DC voltages which are transmitted to the analyser. Due to the sometimes very high internal resistance (potentiostatic measuring principle with internal resistances of up to several gigaohms), these measurements are extremely sensitive to electrical interference and the effects of radiation. Under unfavourable conditions, even minimal movements of the cable can lead to measurement value distortions. An additional insulation layer of the JUMO coaxial cable increases the insulation resistance, which enables a secure connection of the sensor to the transmitter. Conventional coaxial cables from the antenna and computer sector are not suitable for this application and can damage the sensors. This can lead to immediate failure of the sensor as well as a shortened service life. For multiple sensors, for example with integrated temperature sensors, coaxial cables with single wires are available, such as the Variopin (VP).

Connection cable for pH/redox Length: 3 metres Cable type: pH and redox connection cable Ø 5 mm, 75 °C Connection end 1 (sensor side): rotatable cable socket Connection end 2 (device side): without Electronic sensors for analysing liquids require special connection cables and plug connectors. The following applies in principle: The connection between an electrochemical sensor and the transmitter/indicator/controller should be as short as possible. Normally, the cable length is 5 to 10 metres to ensure a high level of functional reliability. If longer cable lengths are required in exceptional cases, the technical documentation for the sensors and measuring devices should be consulted. The cable between the sensor and the analyser must be laid directly, without interruptions such as terminal strips or cable extensions. pH and redox measurement Special coaxial cables with a special design are used for pH and redox measurement. During these measurements, the sensor generates low-intensity DC voltages which are transmitted to the analyser. Due to the sometimes very high internal resistance (potentiostatic measuring principle with internal resistances of up to several gigaohms), these measurements are extremely sensitive to electrical interference and the effects of radiation. Under unfavourable conditions, even minimal movements of the cable can lead to measurement value distortions. An additional insulation layer of the JUMO coaxial cable increases the insulation resistance, which enables a secure connection of the sensor to the transmitter. Conventional coaxial cables from the antenna and computer sector are not suitable for this application and can damage the sensors. This can lead to immediate failure of the sensor as well as a shortened service life. For multiple sensors, for example with integrated temperature sensors, coaxial cables with single wires are available, such as the Variopin (VP).

The calibration box is used for the calibration of Modbus sensors. The wires from the sensors are connected to the terminal block on the front of the box and the Box is connected to a computer via a USB interface.Advantages:Simple and safe calibration of the Modbus sensors

The modular pH measuring package consists of a 3 m connection cable, a Modbus head transmitter, the sensor holder and the flat-head pH electrode. Due to the design of the sensor assembly, only the pH electrode needs to be replaced. All other components of this system can be used continuously. For optimal process integration, the NeoTec Sensor is supplied with a suitable T-piece.Advantages:preconfigured for NeoTecMaster® modular design industry standard resource friendly

A pH sensor from the NeoTec Select Standard product range with 4 - 20 mA module permanently encapsulated in the sensor body.Advantages:Preconfigured for NeoTecMaster® Industry standard Can be used as immersion probe

A pH sensor from the NeoTec Select Standard product range with 4 - 20 mA module permanently encapsulated in the sensor body.Advantages:Preconfigured for NeoTecMaster® Industry standard Can be used as immersion probe

A pH sensor from the NeoTec Select Standard product range with Modbus modul encapsulated in the sensor body.Advantages:Preconfigured for NeoTecMaster® Industry standard Can be used as immersion probe

A pH sensor from the NeoTec Select Standard product range with Modbus modul encapsulated in the sensor body.Advantages:Preconfigured for NeoTecMaster® Industry standard Can be used as immersion probe