The Testomat® LAB TH determines the water hardness (residual total hardness) fully automatically by use of titration and has been developed for monitoring the water quality of water treatment plants, drinking water plants, industrial boilers and for monitoring process water and the Testomat® LAB CL is a robust, wet chemical online measuring converter to measure the concentration of total chlorine or free chlorine in the measuring range 0 - 5 mg/l. The instrument is suitable for controlling the water quality of water treatment plants, drinking water plants, process water monitoring and for monitoring the chlorine concentration in the cooling tower process. Instrument operation is based on the DPD method according to EN ISO 7393-2. The analysis is carried out through the addition of two reagents and the measurement result is obtained after a reaction time of approx. 60 seconds (pure measurement time without flush time). In view of the fact that the Testomat® LAB TH and Testomat® LAB CL was developed for use in multi-parameter systems or for connection to a higher-level control system, we hereby offer you both Testomat® LAB analysis devices in combination with the NeoTecMaster®, which was specially developed by our company, as a package solution at a preferential price. The 4-channel NeoTecMaster® multi-parameter controller included in this package enables the processing of up to four measurement signals in this version. A signal input on the NeoTecMaster® , in this case the RS232 interface and one additional RS232 interface on the included NeoTec Slave module , are used by Testomat® LAB TH and Testomat® LAB CL to display the measured value, the trend and the status messages on the 5 inch screen. In addition to the on board RS232 interface, the NeoTecMaster® also has a Modbus RTU input, which you can use freely after brief technical consultation with us. (Pre-check whether your existing measurement technology to be integrated requires adjustments). The NeoTecMaster® can be systematically supplemented with further optional NeoTec modules (function / signal converter modules) as required, thus enabling the future realisation of further control concepts in a flexible manner. A module that fundamentally expands the range of functions and is already included in the scope of delivery is our NeoTec slave relay module with which you can add potential-free relay contacts to the overall system. You can freely assign these to the incoming measurement signals and thus, for example, implement limit value-related control concepts, as well as output measurement-related messages.  Further advantages of the NeoTecMaster:  Simple operation Integration of the Testomat® world of instruments, here in conjunction with the Testomat® LAB TH and Testomat® LAB CL  Integration into the existing control cabinet, alternatively we offer our NeoTecMaster® housing  Modular range of functions can be extended by NeoTec slave and signal converter modules (measurement, control, regulation) Available as built-in or surface-mounted variant Structured continuous data recording on the integrated SD card or optionally available SDHC card (2Gbyte) as a file in CSV format  In addition, there are proven Testomat® LAB functionalities:  Optimised water detection based on an optical measuring method  RS232 interface for transmission of measured values and error messages  Import and export of settings (basic programming)  Logging of measurement data and messages/alarms via integrated SD card or optionally usable SDHC card (2GByte)  Firmware update via SD card  Execution of parameterisation by means of SD card or "Service Monitor" software via mini-USB (on the unit side) to USB 2.0 (e.g. PC/notebook)  Multilingual software menu in German, English, French, Dutch; Portuguese Integrated self-test with continuous monitoring  Automatic venting of the indicator line  Compact design  Performance profil Testomat® LAB TH:  High-precision titration by means of piston metering pump  Reliable and low-maintenance operation  Minimal indicator and water consumption  Analogue output 4 - 20 mA for transmission of measured values  Programmable hardness unit in °dH, °f, ppm CaCO3, mmol/l  Collective alarm output  Indicator quantities: 500 ml bottles  Analysis trigger:  - Automatic interval operation (interval pause adjustable from 0-255 minutes)  - External analysis input (start/stop)  - Manual start  Performance profil Testomat® LAB CL:  High-precision peristaltic pumps Reliable and low-maintenance operation Minimal reagent and water consumption Analog output 4 - 20 mA for transmission of measured values RS232 interface for transmission of measured values & fault messages Common alarm output Optimised reagents: Only 2 reagents for the determination of total chlorine Optimised reagent set: filling quantities are coordinated so that the reagent set is used up almost evenly. Analysis trigger: Automatic interval operation (interval pause adjustable from 0-255 minutes) External analysis input (start/stop) Manual start  Optional accessories available:  OLED display  Protective cover to increase the IP protection class of the Testomat® LAB devices  NeoTecMaster instrument cover Frequently asked questions What values does this premium package monitor simultaneously? Water hardness and chlorine levels in a system. Why is the combination of two devices useful? It allows for more comprehensive control of water quality. How are both measurement values displayed? Central on a shared display with history. Can I evaluate both devices at the same time? Yes, all data is collected in the controller. How quickly does the chlorine device deliver results? Already after about a minute. Is the system suitable for complex monitoring? Yes, especially for several important water parameters. Can I use the system for automatic responses? Yes, it can react directly to measured values. What is the biggest advantage of this package? More overview and control over several water values at the same time.

The Testomat® LAB TH determines the water hardness (residual total hardness) fully automatically by use of titration and has been developed for monitoring the water quality of water treatment plants, drinking water plants, industrial boilers and for monitoring process water. In view of the fact that the Testomat® LAB TH was developed for use in multi-parameter systems or for connection to a higher-level control system, we hereby offer you the Testomat® LAB TH in combination with the NeoTecMaster®, which was specially developed by our company, as a package solution at a preferential price. The 4-channel NeoTecMaster® multi-parameter controller included in this package enables the processing of up to four measurement signals in this version. A signal input on the NeoTecMaster®, in this case the RS232 interface, is used by Testomat® LAB TH to display the measured value, the trend and the status messages on the 5 inch screen. In addition to the RS232 interface, the NeoTecMaster® also has a Modbus RTU input, which you can use freely after brief technical consultation with us. (Pre-check whether your existing measurement technology to be integrated requires adjustments).  The NeoTecMaster® can be systematically supplemented with further optional NeoTec modules (function / signal converter modules) as required, thus enabling the future realisation of further control concepts in a flexible manner. A module that fundamentally expands the range of functions and is already included in the scope of delivery is our NeoTec slave relay module with which you can add potential-free relay contacts to the overall system. You can freely assign these to the incoming measurement signals and thus, for example, implement limit value-related control concepts, as well as output measurement-related messages. Further advantages of the NeoTecMaster:  Simple operation Integration of the Testomat® world of instruments, here in conjunction with the Testomat® LAB TH  Integration into the existing control cabinet, alternatively we offer our NeoTecMaster® housing  Modular range of functions can be extended by NeoTec slave and signal converter modules (measurement, control, regulation) Available as built-in or surface-mounted variant Structured continuous data recording on the integrated SD card or optionally available SDHC card (2Gbyte) as a file in CSV format  In addition, there are proven Testomat® LAB TH functionalities:  Optimised water detection based on an optical measuring method  RS232 interface for transmission of measured values and error messages  Import and export of settings (basic programming)  Logging of measurement data and messages/alarms via integrated SD card or optionally usable SDHC card (2GByte)  Firmware update via SD card  Execution of parameterisation by means of SD card or "Service Monitor" software via mini-USB (on the unit side) to USB 2.0 (e.g. PC/notebook)  Multilingual software menu in German, English, French, Dutch, Portoguese  Integrated self-test with continuous monitoring  Automatic venting of the indicator line  Compact design  Proven performance profil: High-precision titration by means of piston metering pump  Reliable and low-maintenance operation  Minimal indicator and water consumption  Analogue output 4 - 20 mA for transmission of measured values  Programmable hardness unit in °dH, °f, ppm CaCO3, mmol/l  Collective alarm output  Indicator quantities: 500 ml bottles  Analysis trigger:  - Automatic interval operation (interval pause adjustable from 0-255 minutes)  - External analysis input (start/stop)  - Manual start  Optional accessories available:  OLED display  Protective cover to increase the IP protection class of the Testomat® LAB TH  NeoTecMaster instrument cover Frequently asked questions What does the value-added package with NeoTecMaster® bring me in concrete terms? You get measurement and central control in one system. How many measurement values can the NeoTecMaster® process at the same time? Up to four measurement signals in parallel. Can I view the history of my measurements? Yes, directly on the integrated display. Can the system be expanded later? Yes, can be flexibly extended with additional modules. Can I also control processes with the system? Yes, for example, via relays for automatic reactions. How are measurement data stored and used? They are stored and can be evaluated later. Is the system suitable for complex systems? Yes, especially for networked and larger applications. What is the advantage over a single device? More control, better overview and extended control options.

Ultrasonic water meter DN25 (1") ARAD Sonata – modern and precise water meter This water meter can be used in various areas, such as water consumption measurement in industrial plants or in water treatment systems. Precise consumption measurement with modern ultrasonic technology The ARAD Sonata ultrasonic water meter in the DN25 (1 inch) version is designed for precise measurement of water consumption in larger pipelines. The ultrasonic technology enables wear-free measurement without moving parts, ensuring long-term stable and reliable operation. Even at very low flow rates, the meter delivers accurate results. At the same time, the robust design ensures a long service life and low-maintenance operation. The two integrated pulse outputs can be individually configured and allow flexible integration into existing control, monitoring, or evaluation systems. They support both forward and reverse measurements as well as simultaneous output of both measurements. Why use the ARAD Sonata water meter? This version is particularly suitable for applications with higher flow rates or larger pipe dimensions. Thanks to precise ultrasonic measurement and flexible signal output, water consumption can be reliably recorded and further processed. Your advantages with the ARAD Sonata Ultrasonic measurement without mechanical components High measurement accuracy even at low flow rates Two freely configurable pulse outputs Suitable for DN25 / 1" pipelines Low maintenance and durable due to robust design Possible application areas of the water meter Water consumption measurement in industrial plants Process and cooling water monitoring Water treatment systems Building and system monitoring Technical data Nominal size: DN 25 (1 inch) Measurement principle: Ultrasonic (without moving parts) Pulse outputs: 2 freely configurable Pulse resolution: e.g. 1 / 10 / 100 / 1000 liters adjustable Measurement direction: forward, reverse, or combined Application: Measurement of water consumption in pipelines Frequently asked questions How accurately does the ARAD Sonata measure my water consumption? The meter uses ultrasonic technology and measures flow very precisely – even with very small volumes of water. Do I need to service or clean the water meter regularly? No. As it contains no moving parts, the meter requires little maintenance and operates reliably for many years. Can I retrofit the meter into my existing pipework? In most cases, yes. The meter fits into standard installations and can often be replaced without any problems. Does the meter work even with very low water consumption? Yes, it detects even the smallest water flows and measures them reliably. How long does the battery in the meter last? The built-in battery is designed for a long service life and usually lasts for many years. Can I read the meter digitally or connect it to a wireless system? Many models support digital or wireless reading, allowing consumption data to be recorded conveniently.

Ultrasonic water meter ARAD Sonata 3/4 inch (DN 20) – modern and precise The measurement with this water meter is reliable even at very low flow rates, allowing even the smallest water consumption to be accurately recorded. Water meter with modern ultrasonic technology for precise consumption measurement The ARAD Sonata ultrasonic water meter is a modern and precise water meter for reliable measurement of water consumption. Thanks to ultrasonic technology, the device operates completely without moving parts, enabling particularly long-lasting and low-maintenance use. Why use this water meter? The ARAD Sonata is particularly suitable when precise measurement, low maintenance, and long-term reliability are required. Due to the absence of moving parts, there is minimal wear and no measurement errors caused by mechanical influences. The dual pulse output also enables flexible integration into existing systems for evaluation, control, or monitoring. Your advantages at a glance Very high measurement accuracy even at low flow rates Low maintenance due to the absence of mechanical components Two configurable pulse outputs Long service life and robust design Possible application areas Water consumption measurement in buildings Submetering Industrial and process systems Monitoring of water distribution Applications with high accuracy requirements Technical data Nominal size: DN20 (3/4 inch) Ultrasonic measurement without mechanical components Two freely configurable pulse outputs: forward, reverse, combined Pulse resolution: individually adjustable (e.g. 1 / 10 / 100 / 1000 liters) Protection class: IP68 for demanding environments Service life: up to approx. 12 years Operating temperature: approx. -20 °C to +60 °C Frequently asked questions How accurately does the ARAD Sonata measure my water consumption? The meter uses ultrasonic technology and measures flow very precisely – even with very small volumes of water. Do I need to service or clean the water meter regularly? No. As it contains no moving parts, the meter requires little maintenance and operates reliably for many years. Can I retrofit the meter into my existing pipework? In most cases, yes. The meter fits into standard installations and can often be replaced without any problems. Does the meter work even with very low water consumption? Yes, it detects even the smallest water flows and measures them reliably. How long does the battery in the meter last? The built-in battery is designed for a long service life and usually lasts for many years. Can I read the meter digitally or connect it to a wireless system? Many models support digital or wireless reading, allowing consumption data to be recorded conveniently.