Pumps

Solenoid-operated dosing pumps with horizontal mounting, cost-effective and particularly reliable. K pumps are designed for universal use and various industries. The K series includes an MF version with multifunction software and an LPV version for viscous liquids. Also available with self-venting. Features at a glance With universal input for contact pulse or 0/4+20 mA Stroke frequency proportional to input signal (0+180 imp/min)  Universal input programmable as:  - Pulse divider 1/10, 10/100, 100/1000 - pulse multiplier 1*10  and then by means of rotary knob, infinitely adjustable  Stroke length adjustment by means of rotary knob, stepless from 0...100%  "LEVEL" connection for empty level switch  "ALARM" relay output for empty signal (option) Operating mode:  Constant  Proportional via pulse divider  Inputs: Level control (with pre-alarm) Digital signal Voltage signal Output: Level alarm output Hydraulic parts: - PVDF - PP - stainless steel (AISI 316) - Acrylic glass (PMMA) - Check valves with double ball - O-rings made of FKM B, EPDM, nitrile, PTFE Diaphragm: PTFE diaphragm Accessories (selectable via the configurator) Suction lances: emec Viton suction lance with 40cm immersion length (with BNC connection) emec Viton suction lance with 122cm immersion length (with BNC connection) emec EPDM suction lance with 40cm immersion length (with BNC connection) emec EPDM suction lance with 122cm immersion length (with BNC connection) Included in delivery: Injection valve 1/2" - 4x6mm made of PVDF or PP, depending on the selected version Axial foot valve with empty level switch and 2.5m connection cable with BNC plug 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data)  2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data)  2m vent hose PVC transparent, 4x6mm 2.5m control cable RG174 with BNC plug Operating instructions 6 plugs with screws Fine-wire fuse 4x20mm Mode/LED - each function CONSTANT - continuous operation with 1÷180 metering strokes per minute CONSTANT/DIV 1:10 - continuous operation with 1÷18 metering strokes per minute DIV 1:10 - Pulses coming from the "INPUT" connector are divided by the factor N = 1÷10 (adjustable with DK 2, grey scale) DIV 10:100 - Pulses coming from the "INPUT" connection are divided by a factor of 10÷100. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /10 to N10 = /100 DIV 100:1000 - Pulses coming from the "INPUT" connector are divided by a factor of 100÷1000. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /100 to N10 = /1000 MULT 1:10 - Pulses coming through the "INPUT" connector are multiplied by the factor N = 1÷10 (adjustable with DK 2, grey scale). mA - An analogue signal (0/4÷20 mA) coming from the "INPUT" connection generates dosing strokes according to the factor N = 1÷10 (adjustable with DK 2, grey scale).

Solenoid-operated dosing pumps with horizontal mounting, cost-effective and particularly reliable. K pumps are designed for universal use and various industries. The K series includes an MF version with multifunction software and an LPV version for viscous liquids. Also available with self-venting. Features at a glance With universal input for contact pulse or 0/4+20 mA Stroke frequency proportional to input signal (0+180 imp/min)  Universal input programmable as:  - Pulse divider 1/10, 10/100, 100/1000 - pulse multiplier 1*10  and then by means of rotary knob, infinitely adjustable  Stroke length adjustment by means of rotary knob, stepless from 0...100%  "LEVEL" connection for empty level switch  "ALARM" relay output for empty signal (option) Operating mode:  Constant  Proportional via pulse divider  Inputs: Level control (with pre-alarm) Digital signal Voltage signal Output: Level alarm output Hydraulic parts: - PVDF - PP - stainless steel (AISI 316) - Acrylic glass (PMMA) - Check valves with double ball - O-rings made of FKM B, EPDM, nitrile, PTFE Diaphragm: PTFE diaphragm Accessories (selectable via the configurator) Suction lances: emec Viton suction lance with 40cm immersion length (with BNC connection) emec Viton suction lance with 122cm immersion length (with BNC connection) emec EPDM suction lance with 40cm immersion length (with BNC connection) emec EPDM suction lance with 122cm immersion length (with BNC connection) Included in delivery: Injection valve 1/2" - 4x6mm made of PVDF or PP, depending on the selected version Axial foot valve with empty level switch and 2.5m connection cable with BNC plug 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data)  2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data)  2m vent hose PVC transparent, 4x6mm 2.5m control cable RG174 with BNC plug Operating instructions 6 plugs with screws Fine-wire fuse 4x20mm Mode/LED - each function CONSTANT - continuous operation with 1÷180 metering strokes per minute CONSTANT/DIV 1:10 - continuous operation with 1÷18 metering strokes per minute DIV 1:10 - Pulses coming from the "INPUT" connector are divided by the factor N = 1÷10 (adjustable with DK 2, grey scale) DIV 10:100 - Pulses coming from the "INPUT" connection are divided by a factor of 10÷100. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /10 to N10 = /100 DIV 100:1000 - Pulses coming from the "INPUT" connector are divided by a factor of 100÷1000. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /100 to N10 = /1000 MULT 1:10 - Pulses coming through the "INPUT" connector are multiplied by the factor N = 1÷10 (adjustable with DK 2, grey scale). mA - An analogue signal (0/4÷20 mA) coming from the "INPUT" connection generates dosing strokes according to the factor N = 1÷10 (adjustable with DK 2, grey scale).

Solenoid-operated dosing pumps with horizontal mounting, cost-effective and particularly reliable. K pumps are designed for universal use and various industries. The K series includes an MF version with multifunction software and an LPV version for viscous liquids. Also available with self-venting. Features at a glance With universal input for contact pulse or 0/4+20 mA Stroke frequency proportional to input signal (0+180 imp/min)  Universal input programmable as:  - Pulse divider 1/10, 10/100, 100/1000 - pulse multiplier 1*10  and then by means of rotary knob, infinitely adjustable  Stroke length adjustment by means of rotary knob, stepless from 0...100%  "LEVEL" connection for empty level switch  "ALARM" relay output for empty signal (option) Operating mode:  Constant  Proportional via pulse divider  Inputs: Level control (with pre-alarm) Digital signal Voltage signal Output: Level alarm output Hydraulic parts: - PVDF - PP - stainless steel (AISI 316) - Acrylic glass (PMMA) - Check valves with double ball - O-rings made of FKM B, EPDM, nitrile, PTFE Diaphragm: PTFE diaphragm Accessories (selectable via the configurator) Suction lances: emec Viton suction lance with 40cm immersion length (with BNC connection) emec Viton suction lance with 122cm immersion length (with BNC connection) emec EPDM suction lance with 40cm immersion length (with BNC connection) emec EPDM suction lance with 122cm immersion length (with BNC connection) Included in delivery: Injection valve 1/2" - 4x6mm made of PVDF or PP, depending on the selected version Axial foot valve with empty level switch and 2.5m connection cable with BNC plug 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data)  2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data)  2m vent hose PVC transparent, 4x6mm 2.5m control cable RG174 with BNC plug Operating instructions 6 plugs with screws Fine-wire fuse 4x20mm Mode/LED - each function CONSTANT - continuous operation with 1÷180 metering strokes per minute CONSTANT/DIV 1:10 - continuous operation with 1÷18 metering strokes per minute DIV 1:10 - Pulses coming from the "INPUT" connector are divided by the factor N = 1÷10 (adjustable with DK 2, grey scale) DIV 10:100 - Pulses coming from the "INPUT" connection are divided by a factor of 10÷100. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /10 to N10 = /100 DIV 100:1000 - Pulses coming from the "INPUT" connector are divided by a factor of 100÷1000. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /100 to N10 = /1000 MULT 1:10 - Pulses coming through the "INPUT" connector are multiplied by the factor N = 1÷10 (adjustable with DK 2, grey scale). mA - An analogue signal (0/4÷20 mA) coming from the "INPUT" connection generates dosing strokes according to the factor N = 1÷10 (adjustable with DK 2, grey scale).

Solenoid-operated dosing pumps with horizontal mounting, cost-effective and particularly reliable. K pumps are designed for universal use and various industries. The K series includes an MF version with multifunction software and an LPV version for viscous liquids. Also available with self-venting. Features at a glance With universal input for contact pulse or 0/4+20 mA Stroke frequency proportional to input signal (0+180 imp/min)  Universal input programmable as:  - Pulse divider 1/10, 10/100, 100/1000 - pulse multiplier 1*10  and then by means of rotary knob, infinitely adjustable  Stroke length adjustment by means of rotary knob, stepless from 0...100%  "LEVEL" connection for empty level switch  "ALARM" relay output for empty signal (option) Operating mode:  Constant  Proportional via pulse divider  Inputs: Level control (with pre-alarm) Digital signal Voltage signal Output: Level alarm output Hydraulic parts: - PVDF - PP - stainless steel (AISI 316) - Acrylic glass (PMMA) - Check valves with double ball - O-rings made of FKM B, EPDM, nitrile, PTFE Diaphragm: PTFE diaphragm Accessories (selectable via the configurator) Suction lances: emec Viton suction lance with 40cm immersion length (with BNC connection) emec Viton suction lance with 122cm immersion length (with BNC connection) emec EPDM suction lance with 40cm immersion length (with BNC connection) emec EPDM suction lance with 122cm immersion length (with BNC connection) Included in delivery: Injection valve 1/2" - 4x6mm made of PVDF or PP, depending on the selected version Axial foot valve with empty level switch and 2.5m connection cable with BNC plug 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data)  2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data)  2m vent hose PVC transparent, 4x6mm 2.5m control cable RG174 with BNC plug Operating instructions 6 plugs with screws Fine-wire fuse 4x20mm Mode/LED - each function CONSTANT - continuous operation with 1÷180 metering strokes per minute CONSTANT/DIV 1:10 - continuous operation with 1÷18 metering strokes per minute DIV 1:10 - Pulses coming from the "INPUT" connector are divided by the factor N = 1÷10 (adjustable with DK 2, grey scale) DIV 10:100 - Pulses coming from the "INPUT" connection are divided by a factor of 10÷100. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /10 to N10 = /100 DIV 100:1000 - Pulses coming from the "INPUT" connector are divided by a factor of 100÷1000. With DK 2 (grey scale N = 1÷10) the factor can be set proportionally: N1 = /100 to N10 = /1000 MULT 1:10 - Pulses coming through the "INPUT" connector are multiplied by the factor N = 1÷10 (adjustable with DK 2, grey scale). mA - An analogue signal (0/4÷20 mA) coming from the "INPUT" connection generates dosing strokes according to the factor N = 1÷10 (adjustable with DK 2, grey scale).

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

The EMEC KMS MF series is a versatile dosing pump series that supports various operating modes, including constant, divide, multiply, ppm, perc, mlq, batch, volt, mA and timer. This flexibility enables precise and customisable dosing for different applications. Here are some important features of the EMEC KMS MF series: Multifunctionality: supports different operating modes for different dosing requirements. High precision: Thanks to the PTFE diaphragm and robust design, the pumps are durable and reliable. Easy integration: Can be controlled proportionally via external signals such as 4-20 mA, 0-10 V or pulses. You can also: Set automatic re-priming when the flow sensor is installed (sefl menu) Enable the system for over-recovery (sefl menu) Set a maintenance dosing when the system is at a standstill (ppm menu - upkeep setting) The pump has the following features: STAND-BY input SEFL input (flow sensor) LEVEL input (level controller) ALARM contact output The dosing capacity of the pump is determined by the number of pulses and the capacity per individual injection. The setting of individual injections is only linear for values between 30% and 100%. The operating and control parameters are shown on an LCD display and managed via a keypad.

Slow mode: With the exclusive SLOW MODE function of PRISMA dosing pumps, the stroke speed can be reduced from 100% to 1% during the priming cycle. This function facilitates the adaptation of the pump to the dosing medium and increases the reliability and deaeration of high viscosity dosing media. Colour display and encoder control: The PRISMA dosing pump is equipped with an encoder for quick and easy menu navigation, as well as a large display for a convenient setting of the operating parameters and monitoring of the pump functions. The intelligent multi-function software allows the operator to precisely set the dosage required by the application. This allows you to enter the desired value and read it directly in ml/h or l/h via the graphic display. All operating modes are displayed clearly and easily through self-explaining symbols. Operating mode: - Constant - Proportional control by external input, operating mode mg/l (ppm) - Proportional control by external input, operating mode percent (%) - Start-pause - Weekly timer - External input (start and/or pause) Turndown function: Prisma's stepper motor driven pumps offer the most precise control over stroke speed and provide an excellent turndown ratio of up to 4800:1. means that Prisma can divide the dosing process into a maximum of 4800 steps to ensure the most homogeneous and precise distribution of the product depending on the desired application to be dosed. Furthermore, the CC per pulse function provides additional dosing accuracy. Inputs: - Multifunction input - Level (with pre-alarm) - Pulse transmitter Water meter (PPM mode, %, mlq, mA, V, pulse) - Standby - External contact (voltage-free) Output: Alarm (common for all alarms) Interface: - RS485 / Modbus RTU (optional) - Bluetooth for remote control (optional on request) Hydraulic parts: - PVDF - PP - Stainless steel (AISI 316) - Acrylic glass (PMMA) - Check valves with double ball - O-rings made of FKM B, EPDM, nitrile, PTFE Membrane: PTFE diaphragm Scope of delivery: 1x PRISMA dosing pump 90 -240 VAC, 50/60 Hz with mains cable 1x Axial foot valve with level switch / empty indicator made of PVDF or PP, depending on the selected version 1x Injection valve 1/2" or 3/4" made of PVDF or PP, depending on the selected version 1x 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data) 1x 2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data) 1x 2m vent hose PVC transparent, 4x6mm 1x 2m 3-pole signal cable for "ALARM" output 1x 1.5m 5-pole signal cable for universal signal input "INPUT", standby input and external start 1x instruction manual 4x dowels (6mm diameter)  4x screws, 4.5 x 40  1x fine-wire fuse 5 x 20mm, ...AT * For 6x8mm only one hose (PE Matt) with 4m length, for two hoses, simply cut through. The operating modes at a glance Constant - The pump delivers a constant quantity. ml per pulse -Dosage of a constant quantity per pulse PPM - proportional dosing in ppm Percent - proportional dosing in percent MLQ - dosing proportional to quantity in MLQ Batch - use the pump to fill a container Volt - control pump proportionally with 0-10V signal mA - control pump proportionally with 0/4-20mA signal Pulse - control pump proportionally with pulse signal. Pause-run - set surge dosing time-controlled

Slow mode: With the exclusive SLOW MODE function of PRISMA dosing pumps, the stroke speed can be reduced from 100% to 1% during the priming cycle. This function facilitates the adaptation of the pump to the dosing medium and increases the reliability and deaeration of high viscosity dosing media. Colour display and encoder control: The PRISMA dosing pump is equipped with an encoder for quick and easy menu navigation, as well as a large display for a convenient setting of the operating parameters and monitoring of the pump functions. The intelligent multi-function software allows the operator to precisely set the dosage required by the application. This allows you to enter the desired value and read it directly in ml/h or l/h via the graphic display. All operating modes are displayed clearly and easily through self-explaining symbols. Operating mode: - Constant - Proportional control by external input, operating mode mg/l (ppm) - Proportional control by external input, operating mode percent (%) - Start-pause - Weekly timer - External input (start and/or pause) Turndown function: Prisma's stepper motor driven pumps offer the most precise control over stroke speed and provide an excellent turndown ratio of up to 4800:1. means that Prisma can divide the dosing process into a maximum of 4800 steps to ensure the most homogeneous and precise distribution of the product depending on the desired application to be dosed. Furthermore, the CC per pulse function provides additional dosing accuracy. Inputs: - Multifunction input - Level (with pre-alarm) - Pulse transmitter Water meter (PPM mode, %, mlq, mA, V, pulse) - Standby - External contact (voltage-free) Output: Alarm (common for all alarms) Interface: - RS485 / Modbus RTU (optional) - Bluetooth for remote control (optional on request) Hydraulic parts: - PVDF - PP - Stainless steel (AISI 316) - Acrylic glass (PMMA) - Check valves with double ball - O-rings made of FKM B, EPDM, nitrile, PTFE Membrane: PTFE diaphragm Scope of delivery: 1x PRISMA dosing pump 90 -240 VAC, 50/60 Hz with mains cable 1x Axial foot valve with level switch / empty indicator made of PVDF or PP, depending on the selected version 1x Injection valve 1/2" or 3/4" made of PVDF or PP, depending on the selected version 1x 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data) 1x 2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data) 1x 2m vent hose PVC transparent, 4x6mm 1x 2m 3-pole signal cable for "ALARM" output 1x 1.5m 5-pole signal cable for universal signal input "INPUT", standby input and external start 1x instruction manual 4x dowels (6mm diameter)  4x screws, 4.5 x 40  1x fine-wire fuse 5 x 20mm, ...AT * For 6x8mm only one hose (PE Matt) with 4m length, for two hoses, simply cut through. The operating modes at a glance Constant - The pump delivers a constant quantity. ml per pulse -Dosage of a constant quantity per pulse PPM - proportional dosing in ppm Percent - proportional dosing in percent MLQ - dosing proportional to quantity in MLQ Batch - use the pump to fill a container Volt - control pump proportionally with 0-10V signal mA - control pump proportionally with 0/4-20mA signal Pulse - control pump proportionally with pulse signal. Pause-run - set surge dosing time-controlled

Slow mode: With the exclusive SLOW MODE function of PRISMA dosing pumps, the stroke speed can be reduced from 100% to 1% during the priming cycle. This function facilitates the adaptation of the pump to the dosing medium and increases the reliability and deaeration of high viscosity dosing media. Colour display and encoder control: The PRISMA dosing pump is equipped with an encoder for quick and easy menu navigation, as well as a large display for a convenient setting of the operating parameters and monitoring of the pump functions. The intelligent multi-function software allows the operator to precisely set the dosage required by the application. This allows you to enter the desired value and read it directly in ml/h or l/h via the graphic display. All operating modes are displayed clearly and easily through self-explaining symbols. Operating mode: - Constant - Proportional control by external input, operating mode mg/l (ppm) - Proportional control by external input, operating mode percent (%) - Start-pause - Weekly timer - External input (start and/or pause) Turndown function: Prisma's stepper motor driven pumps offer the most precise control over stroke speed and provide an excellent turndown ratio of up to 4800:1. means that Prisma can divide the dosing process into a maximum of 4800 steps to ensure the most homogeneous and precise distribution of the product depending on the desired application to be dosed. Furthermore, the CC per pulse function provides additional dosing accuracy. Inputs: - Multifunction input - Level (with pre-alarm) - Pulse transmitter Water meter (PPM mode, %, mlq, mA, V, pulse) - Standby - External contact (voltage-free) Output: Alarm (common for all alarms) Interface: - RS485 / Modbus RTU (optional) - Bluetooth for remote control (optional on request) Hydraulic parts: - PVDF - PP - Stainless steel (AISI 316) - Acrylic glass (PMMA) - Check valves with double ball - O-rings made of FKM B, EPDM, nitrile, PTFE Membrane: PTFE diaphragm Scope of delivery: 1x PRISMA dosing pump 90 -240 VAC, 50/60 Hz with mains cable 1x Axial foot valve with level switch / empty indicator made of PVDF or PP, depending on the selected version 1x Injection valve 1/2" or 3/4" made of PVDF or PP, depending on the selected version 1x 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data) 1x 2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data) 1x 2m vent hose PVC transparent, 4x6mm 1x 2m 3-pole signal cable for "ALARM" output 1x 1.5m 5-pole signal cable for universal signal input "INPUT", standby input and external start 1x instruction manual 4x dowels (6mm diameter)  4x screws, 4.5 x 40  1x fine-wire fuse 5 x 20mm, ...AT * For 6x8mm only one hose (PE Matt) with 4m length, for two hoses, simply cut through. The operating modes at a glance Constant - The pump delivers a constant quantity. ml per pulse -Dosage of a constant quantity per pulse PPM - proportional dosing in ppm Percent - proportional dosing in percent MLQ - dosing proportional to quantity in MLQ Batch - use the pump to fill a container Volt - control pump proportionally with 0-10V signal mA - control pump proportionally with 0/4-20mA signal Pulse - control pump proportionally with pulse signal. Pause-run - set surge dosing time-controlled

Slow mode: With the exclusive SLOW MODE function of PRISMA dosing pumps, the stroke speed can be reduced from 100% to 1% during the priming cycle. This function facilitates the adaptation of the pump to the dosing medium and increases the reliability and deaeration of high viscosity dosing media. Colour display and encoder control: The PRISMA dosing pump is equipped with an encoder for quick and easy menu navigation, as well as a large display for a convenient setting of the operating parameters and monitoring of the pump functions. The intelligent multi-function software allows the operator to precisely set the dosage required by the application. This allows you to enter the desired value and read it directly in ml/h or l/h via the graphic display. All operating modes are displayed clearly and easily through self-explaining symbols. Operating mode: - Constant - Proportional control by external input, operating mode mg/l (ppm) - Proportional control by external input, operating mode percent (%) - Start-pause - Weekly timer - External input (start and/or pause) Turndown function: Prisma's stepper motor driven pumps offer the most precise control over stroke speed and provide an excellent turndown ratio of up to 4800:1. means that Prisma can divide the dosing process into a maximum of 4800 steps to ensure the most homogeneous and precise distribution of the product depending on the desired application to be dosed. Furthermore, the CC per pulse function provides additional dosing accuracy. Inputs: - Multifunction input - Level (with pre-alarm) - Pulse transmitter Water meter (PPM mode, %, mlq, mA, V, pulse) - Standby - External contact (voltage-free) Output: Alarm (common for all alarms) Interface: - RS485 / Modbus RTU (optional) - Bluetooth for remote control (optional on request) Hydraulic parts: - PVDF - PP - Stainless steel (AISI 316) - Acrylic glass (PMMA) - Check valves with double ball - O-rings made of FKM B, EPDM, nitrile, PTFE Membrane: PTFE diaphragm Scope of delivery: 1x PRISMA dosing pump 90 -240 VAC, 50/60 Hz with mains cable 1x Axial foot valve with level switch / empty indicator made of PVDF or PP, depending on the selected version 1x Injection valve 1/2" or 3/4" made of PVDF or PP, depending on the selected version 1x 2m pressure hose made of PVDF (for PVDF head) or PE (for PP head), 4x6mm or 6x8mm* (depending on version, see technical data) 1x 2m suction hose PVC transparent, 4x6mm, 6x8mm*, 8x10mm (depending on version, see technical data) 1x 2m vent hose PVC transparent, 4x6mm 1x 2m 3-pole signal cable for "ALARM" output 1x 1.5m 5-pole signal cable for universal signal input "INPUT", standby input and external start 1x instruction manual 4x dowels (6mm diameter)  4x screws, 4.5 x 40  1x fine-wire fuse 5 x 20mm, ...AT * For 6x8mm only one hose (PE Matt) with 4m length, for two hoses, simply cut through. The operating modes at a glance Constant - The pump delivers a constant quantity. ml per pulse -Dosage of a constant quantity per pulse PPM - proportional dosing in ppm Percent - proportional dosing in percent MLQ - dosing proportional to quantity in MLQ Batch - use the pump to fill a container Volt - control pump proportionally with 0-10V signal mA - control pump proportionally with 0/4-20mA signal Pulse - control pump proportionally with pulse signal. Pause-run - set surge dosing time-controlled